Solving Issues Regarding Not Able To Open Outlook

The Microsoft Outlook is a wonderful application that has found use by many. Home users as well as business professionals make use of this wonderful application. Normally people are pretty happy with their Outlook and working on the Outlook is simple and free from issues. However, sometimes, uses experience trouble with their Outlook as they receive an error message stating: Cannot start Microsoft Office Outlook. Unable to open the Outlook window.

Users are unaware of the cause of the issue and they become more confused as after running the Microsoft office diagnostics and it showing no errors. Users are made to suffer as the error message pops up, and users are not able to use Microsoft Outlook. Well the culprit is a corrupt xml file that makes these error messages pop up. By following the below provided guidelines, cannot start Outlook issue can be fixed.

• Making Use Of The Resetnavpane Switch.

If you are using Outlook, you have to exit Outlook. In windows 7 or windows vista, from the search field or in the run command, enter Outlook.exe /resetnavpane. Make sure that there are no spaces when you enter the command. After the command is inputted, the Enter button has to be tapped. When the enter button is tapped, Outlook will be restarted and the navigation pane will be reset to default settings.

• Removing the navigation pane configuration file.

With the switch, if issues are encountered, the xml file that contains the navigation pane settings can be deleted. %appdata%\Microsoft\Outlook should be pasted in the run or search or even in the windows explorer address bar and tap the Enter button. Now the folder that contains the Outlook configuration files will be opened in the windows explorer. It is always better to use the switch than go in for the option of deleting the file directly.

By making use of these guidelines, cannot start Outlook issues can be tackled and you can again use your Outlook to send and receive mails. The corruptions that affect the files may be due to different reasons like abrupt system shutdown, virus infections or even spyware infections. So it is advisable to have a very good antivirus installed on your system. In addition, if you have any trouble following these tips or you want more details on fixing the issue you can visit the Microsoft support website to get more help. The Microsoft support website provides the best Outlook help required for you.

How To Access Outlook Email On Your iPad

The iPad is one of the most popular digital devices, it can be used to perform many tasks, and over the years, it has proved to do so. You can check your mails, browse the web, watch videos and do tons of other stuff on the iPad. When you are using your iPad, you may need to use your Outlook email on it. Well the procedure to setup Outlook email on your iPad is very simple and you can do it in a few steps. By following the below provided Outlook email setup guidelines, you can easily setup Outlook email on your iPad.

Instructions

• If the iPad is switched off, turn on the iPad or unlock the iPad. On the iPad, many icons will be present like iTunes, maps and so on. Select the Settings icon and from it choose Mail, Contacts, and Calendars. Now choose Add Account. 
• From the Add Account section, select Microsoft exchange. 
• In the appropriate fields, you have to enter your name, email address and password. Make sure that there are no errors while you enter the details as it can cause the setup to be unsuccessful. 
• Now select Next. The IPad will try to find the settings and setup the Outlook account. If the process is successful, go to Step 7 directly, otherwise you have to follow the below steps. 
• You will require to manually find the Exchange Active Syncserver name, if iPad does not locate the settings. 
• After finding the server name, in the server box, type in your server name and select Next. 
• You have to select what you want to synchronize between the device and the account and choose the Save option. By default, your calendar, email and contact information will be saved. 
• A pass code maybe asked to be entered, so select Continue and enter the pass code. You will require entering a numeric pass code. The email account on the device cannot be viewed if the pass code is not entered. It should be noted that later also, in the IPad settings, the pass code can be setup.

By following these Outlook email setup guidelines, the Outlook email can be setup on your iPad. If you have any trouble following the guidelines or need further assistance on doing the process, you may contact the Outlook support website and redress the issues. The Outlook help and support center provides fixes for all Outlook related issues.

Steps To Repair PST Files In Outlook

The Microsoft Outlook is a powerful email client that is used by many. Over the years, many versions of the program have released and have received high acclaim and won rave reviews. The emails in Outlook are stored in a .PST file and it can get easily damaged or corrupted. The problems can crop up with the .PST file due to bad sectors on the hard disk, sudden system shutdown, voltage fluctuations and even virus and malware attacks. If the .PST file is damaged or corrupted, what happens is that the emails or the folders of the mailbox cannot be accessed.

A very important tool called the scanpst.exe is an inbox repair tool provided by Microsoft Office and it can be used to repair damaged .PST files. By following the below provided Outlook repair guidelines, the Outlook mailbox can be repaired.

Instructions

• If Microsoft Outlook is running, close it. 
• The Windows Explorer has to be accessed and you have to go to C:\Program Files\Microsoft Office\Office 14. You will have to go to the path- C\Program Files (x86)\Microsoft Office\Office 14 if you are running a 64-bit operating system. 
• The Scanpst.exe icon will be present and it has to be accessed. The Browse option has to be selected and the damaged .PST file has to be located. For users running Windows Vista and Windows 7, the .PST file can be located in the location C:\users\yourusername\AppData\Local\Microsoft\Outlook. 
• The .PST file has to be highlighted and the Open option has to be selected. Now the Start option has to be selected. The inbox repair tool will scan for errors and if any errors are found, they will be reported. 
• The Make Backup Of Scanned File Before Repairing option has to be selected. Now the Repair option has to be selected. When the Inbox repair tool completes the repair of the .PST file, a confirmation box will appear. 

By following these simple Outlook repair guidelines, the .PST files can be repaired and the emails in the mailbox can be accessed. In addition, it is essential to have a very good antivirus tool installed on the system and to perform the Disk Defragment tool. If you have any doubts about the steps or if you have any trouble understanding the process, you can contact Microsoft help and support in order to resolve your Outlook problems.

Adding WordPress StumbleUpon Functionality

StumbleUpon has become one of the most sought after social bookmarking and sharing websites. Websites on the internet are managed by StumbleUpon, based on the way users rate the pages on these websites. If you are hosting a WordPress blog, this will be a helpful way for visitors to share the content on your site with minimal effort with their friends, either on the StumbleUpon network, or other social networks.
There are several ways to adding StumbleUpon functionality as part of your WordPress Landing Page theme, and it basically results in the popping up of a link to your site on StumbleUpon, every time a visitor clicks on the StumbleUpon icon. The people they share it to can click on the link that they receive and be transported to your site; meanwhile the votes they give will help rate your content in the StumbleUpon rankings.

Instructions

• Log in to the WordPress dashboard by entering your details in the WordPress login page. If you have problems getting to this page, just type in wp-login.php after the slash symbol that follows the URL of the website. 
• On the left pane, you’ll see many options including Plugins. Hover the cursor on this option and from the menu that appears, select Add New. 
• Enter a name for the StumbleUpon plugin you wish to integrate to the site, or just type in StumbleUpon, and then hit the Search Plugins button; this will bring up a list of available plugins for you to choose from.
• Find the plugin from the list and select it, for instance, the StumbleUpon WordPress Plugin entry. If you can’t reach a decision, read to find out the features of each, and check the ratings that each has.
• Underneath the name of the plugin, you’ll find the Install Now button. Click this and then confirm the action by clicking OK. You might be asked to supply additional information like your host name and current password; if so, furnish these. Wait for the installation of the plugin to finish, though it usually doesn’t take more than a few seconds.
• Once that is done, hit the Activate Plugin button to enable the plugin on the blog. It is now a part of your WordPress landing page theme as well.

Hope the above instructions were helpful to you in integrating the StumbleUpon functionality with the WordPress landing page. For further assistance, you can get in touch with the Microsoft tech support team.

How To Configure A Proxy In Firefox

Firefox is a web browser that is developed and released by Mozilla. The browser provides a variety of options for configuring proxy settings in the system. The browser has features for detecting a proxy found in the network or you can use proxy settings in the browser or from third party developers. The main function of a proxy server is to act as an intermediary and filter web-browsing traffic. Some networks will require proxy settings for connecting to the internet and incorrect proxy settings will block you from accessing the internet from the Firefox browser. Below we discuss how to setup proxy in Mozilla Firefox settings menu.

Instructions

• The first step is to open the Firefox browser by double clicking on its icon in the desktop or by clicking on the quick launch icon in the taskbar. 
• You can set the proxy settings in the Firefox browser from the Connection Settings window in the Firefox application. To open the window, click on the Firefox Menu button in the top of the browser window. 
• Now click on the Advanced option that is found under the Options tab in the browser window. 
• When the Advanced tab opens, look for the Network menu option in the top of the window and click on it. 
• Now click on the Settings button found under the option named Connection. 
• Now you can see various options for setting the proxy like the No Proxy option that disables the use of proxy settings completely and Use System Proxy option that makes the browser to use the proxy configured in your Windows computer. 
• Another set of proxy settings is the Manual Proxy Configuration option that allows the user to set the proxy settings manually and access the internet using the specified settings. The Auto-detect Proxy Settings option can be selected if you opt to select the proxy system in the network automatically. 
• If you have selected the Manual Proxy option, fill the details in the window that appears concerning the different settings for accessing internet. 

If you follow the above steps clearly, then you can easily set a proxy for accessing internet from the network computer. If you are not able to access the internet even after configuring a proxy setting in the Mozilla Firefox settings menu, then feel free to contact the Mozilla support team for further support.

How To Delete The Microsoft Updates That Are In Queue

 Windows Update or the Automatic Updates feature of the Windows OS is an accessory program that can download the latest updates available for your operating system thereby helping you to keep your computer and its OS up to date. This will make your PC immune to virus attacks and will improve the performance of the computer. The Windows Update feature can be changed to manual so that the user can select the updates to be installed to your computer from the list of available updates. If the user chooses to install the updates manually, the uninstalled updates can start to queue up in the list. This article discusses the methods to delete the updates in queue. You may also contact the Windows support number to know more on the steps.

Instructions

• Press on the Windows key on your keyboard, which is located in between the left CTRL and ALT keys or click on the Start button in the lower left hand corner of the desktop screen to access the Start menu. 
• In the menu that appears, select the Control Panel option.
• In the Control Panel window, you will be able to locate the Windows Update icon. Double click on this icon to open it. This will open a new window that shows you the number of Important and Optional updates that are available for your computer. You can click on either of these categories to display the list of the individual updates.
• Right-click on the update that you wish to remove from the list. From the options available, select Hide update. This will gray out the update text. You can repeat this process for all the updates that you wish to get rid of. When you open the Windows Update the next time, these updates will not be shown in the list.

These are the simplest steps to delete those unwanted Microsoft Updates that are there in the queue. You may also refer the Microsoft Updates module present in the official web site of Microsoft to know more on deleting the updates in the queue. If you are not able to understand any of the steps discussed above, you may contact the Windows support number. The technician will explain the steps to be performed to delete the updates.

How To Delete AutoComplete Entries In Microsoft Outlook

Other than just email management, Microsoft Outlook has many other convenient features like Spellcheck, Category Options, AutoComplete etc. that make your Outlook tasks easy. Here, in this section, we will discuss about the AutoComplete feature and ways to delete AutoComplete entries.
AutoComplete is a feature which displays suggestions for names and e-mail addresses as you begin to type them. These suggestions are possible matches from a list of names and e-mail addresses that you have typed before, known as the AutoComplete name list.
In Microsoft Outlook, the AutoComplete entries are stored in a file with an .NK2 extension. The location of this file depends on your Operating System. If you are using Windows XP, you can find the Outlook AutoComplete file at C:\Documents and Settings\Username\Application Data\Microsoft\Outlook. The file will be named the same as the default Outlook profile. If it is Windows Vista/7, the AutoComplete file will be located at C:\Users\User Profile\AppData\Roaming\Microsoft\Outlook.
The following Outlook Tech Support guidelines will help you delete AutoComplete entries.

Instructions for deleting all AutoComplete entries

• Close Microsoft Outlook if it is open. 
• Now navigate to the location where the Outlook AutoComplete entries are stored. Go to the above mentioned location, depending on the type of operating system you have on your computer. 
• The folder might be hidden, depending on your system file settings. To view the files and folders, go to the Tools menu, and click on Folder Options. Click the View tab, and then, under Advanced settings, under Hidden files and folders, click Show hidden files and folders and uncheck Hide extensions for known file types. Then click the OK button.
• Locate the Outlook.NK2 file and delete it. Make sure that you delete the file ending in NK2 only. If you find other files with the name Outlook, you should leave them as they are. 

Instructions for deleting specific AutoComplete entry

• Open Microsoft Outlook and click on the Mail section located at the left hand Navigation Pane. 
• Now you need to open a new email by clicking the New button located at the top of the screen just below the list of menu options.
• Enter the email address you want to remove from AutoComplete. You can find the email address displayed below the line of text you are typing.
• Use the down arrow key to select the entry you want to remove and press the Delete key on your keyboard. This will remove the entry from AutoComplete. 

If you have any further queries, contact the Outlook Tech Support team and get more assistance.